Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rear drive shaft 13T – Kawasaki K3V180DT

Kawasaki · K3V

Rear drive shaft 13T – Kawasaki K3V180DT

New, correct codeOn request13T

Quick answer

The Kawasaki K3V180DT rear drive shaft in the 13-tooth spline (13T) couples drive to the second stage of the K3V180DT tandem pump on 35–45 t class excavators.

Việt Trung Hải supplies the correct 13T shaft with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Kawasaki · K3V
Model code
13T
SKU
2021-590-1-18
Condition
New, correct code
Availability
On request

The Kawasaki K3V180DT rear drive shaft in the 13-tooth spline (13T) couples drive to the second unit of this tandem pump, passing torque into the rear cylinder block to spin the rotary group. It fits the K3V180DT main pump used on 35–45 t class excavators.

What the 13T rear shaft fits

The rear shaft sits inboard and meshes with the second pump stage — unlike the front shaft, which takes drive straight from the engine. Spline count is the selection key: this one is 13T and must match your cylinder block and coupling exactly. The wrong tooth count will not mesh and wears out fast.

When to replace

Replace it for axial play, worn or chipped splines, a scored seal journal that leaks, or knocking under load. Once the splines round off, drive to the rear stage is lost and flow drops.

Việt Trung Hải supplies correct-code K3V180DT shafts. As an authorized JIC Hydraulics distributor we carry JIC shafts cut on the original code — hardened steel, precise spline machining, straight into the pump you have. Genuine shafts are stocked too. Call for a fast quote.

Frequently asked questions

How does the rear shaft differ from the front shaft on the K3V180DT?

The front shaft takes drive straight from the engine into the first pump stage. The rear shaft sits inboard and passes drive to the second stage of this tandem pump. They differ in position and can differ in spline count, so they are not interchangeable.

What does 13T mean on this shaft?

13T is the spline tooth count — 13 teeth. It is the most important selection criterion: the splines must match your cylinder block and coupling exactly, otherwise the shaft will not mesh and will wear out fast.

Do you stock the K3V180DT drive shaft?

Yes. Việt Trung Hải supplies the Kawasaki K3V180DT shaft by correct code and spline count, in genuine and in JIC — we are an authorized JIC Hydraulics distributor. Send us the tooth count and shaft position for a fast quote.

Get a quote

Request a quote: Rear drive shaft 13T – Kawasaki K3V180DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides