Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rear drive shaft 13T – Kawasaki K3V112DT

Kawasaki · K3V

Rear drive shaft 13T – Kawasaki K3V112DT

New, correct codeOn request13T

Quick answer

The 13T rear drive shaft for the Kawasaki K3V112DT main pump is the rear-side shaft with 13 splines that couples torque into the second group of the tandem pump. The K3V112DT fits ~20-ton excavators like Komatsu PC200, Kobelco SK200, Hitachi ZX200 and Doosan DX225.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC shafts on code with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Kawasaki · K3V
Model code
13T
SKU
2021-590-1-16
Condition
New, correct code
Availability
On request

Rear drive shaft 13T for Kawasaki K3V112DT

The part sold is the rear drive shaft - the segment that couples torque into the second pump group of the K3V112DT tandem pump, unlike the front shaft that takes drive straight from the engine. It has 13 splines (13T); tooth count is the key selection criterion, since a wrong count will not mesh. The shaft transmits torque into the cylinder block to turn the rotary group. The K3V112DT main pump runs on ~20-ton excavators such as Komatsu PC200, Kobelco SK200, Hitachi ZX200 and Doosan DX225.

Replace when

Rounded spline teeth, coupling play, noise or vibration under load, and uneven pressure between the two pump groups all point to a worn rear shaft. A bent shaft, scored journal or stripped thread also calls for a new shaft right away.

Choosing the right part

Order by tooth count and length and you are done. JIC Hydraulics machines its shafts on the original code and Việt Trung Hải distributes them under authorization — hardened steel, precisely cut splines, straight into the block you have. We stock K3V112DT rear shafts in genuine and JIC across spline counts, check specs to your machine and quote fast.

Frequently asked questions

How is the rear shaft different from the front shaft on the K3V112DT?

The rear shaft couples drive into the second group of the tandem pump, while the front shaft takes drive directly from the engine. They differ in position and often in spline count, so pick the correct one when replacing.

What does 13T mean on the shaft?

13T is the shaft spline count, meaning 13 teeth, not tonnage. It is the most important selection detail; the shaft must have 13 splines and the correct length to mesh and fit properly.

Does Việt Trung Hải stock the K3V112DT rear shaft?

Yes. We supply K3V112DT rear drive shafts in genuine and JIC Hydraulics parts across spline counts, all machined to the original code so they mesh with the pump as it is. Send your machine model and tooth count for a quick check and quote.

Get a quote

Request a quote: Rear drive shaft 13T – Kawasaki K3V112DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides