Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rear drive shaft 12T – Kawasaki K3V63DT

Kawasaki · K3V

Rear drive shaft 12T – Kawasaki K3V63DT

New, correct codeOn request12T

Quick answer

The 12T rear drive shaft for the Kawasaki K3V63DT main pump couples to the second unit in a tandem pump; it has a 12-tooth spline and fits ~13-ton excavators like the Komatsu PC120 and Kobelco SK130.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC shafts on code with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Kawasaki · K3V
Model code
12T
SKU
2021-590-1-15
Condition
New, correct code
Availability
On request

Rear drive shaft for Kawasaki K3V63DT

This is the rear (output) shaft — it couples to the second unit in a tandem pump, unlike the front shaft driven directly by the engine. It has a 12-tooth spline (code 12T), and tooth count is the key selection criterion, so confirm 12 teeth before ordering. The shaft carries torque into the cylinder block to turn the rotary group of the Kawasaki K3V63DT main pump, used on ~13-ton excavators such as the Komatsu PC120 and Kobelco SK130.

When to replace

Watch for spline play, shaft wobble, knocking under load, or worn, chipped or twisted spline teeth causing slipping drive and pressure loss. Replace the whole shaft to avoid damaging the cylinder block and pump group.

Quality

As an authorized JIC Hydraulics distributor, Việt Trung Hải ships the K3V63DT 12T rear shaft on the JIC code — splines cut to spec, journals on tolerance, heat treated for hardness and concentricity, running true in the original pump. Genuine Kawasaki shafts share the same shelf. Contact us for a fast quote.

Frequently asked questions

How is the K3V63DT rear shaft different from the front shaft?

The front shaft takes drive directly from the engine, while the rear shaft couples to the second unit in a tandem pump. This one has a 12-tooth spline (12T); match both the tooth count and the front/rear position when ordering.

How do I know the K3V63DT shaft needs replacing?

Common signs are spline play, shaft wobble, knocking under load, or weak pump output from a slipping drive. If the spline teeth look worn flat, pitted or twisted when you strip the pump, replace the shaft.

Does Việt Trung Hải stock the 12T rear shaft for the K3V63DT?

Yes. We carry the K3V63DT 12T rear shaft in genuine Kawasaki and in JIC Hydraulics parts machined to the same code, meshing with the original pump as they are. Contact us for a fast quote based on the spline count you need.

Get a quote

Request a quote: Rear drive shaft 12T – Kawasaki K3V63DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides