Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rear drive shaft 12T – Kawasaki K3V112DT

Kawasaki · K3V

Rear drive shaft 12T – Kawasaki K3V112DT

New, correct codeOn request12T

Quick answer

The 12T rear drive shaft for the Kawasaki K3V112DT is a 12-tooth spline rear shaft that carries torque to the second unit of this tandem main pump, which powers ~20-ton excavators like the PC200, SK200, ZX200 and DX225.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC shafts on the correct 12T spline with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Kawasaki · K3V
Model code
12T
SKU
2021-590-1-12
Condition
New, correct code
Availability
On request

12T rear drive shaft for the K3V112DT

The 12-tooth spline rear drive shaft (code 12T) is the rear coupling shaft of the Kawasaki K3V112DT main pump. In a tandem pump the rear shaft carries torque across to the second pump unit and into the cylinder block to spin the rotary group. Tooth count is the key selection point: a 12T shaft must be exactly 12-spline, not a 13T or 17T variant. The K3V112DT powers ~20-ton excavators such as Komatsu PC200, Kobelco SK200, Hitachi ZX200 and Doosan DX225.

When to replace and choosing quality

Worn or stripped splines cause lost drive, weak or erratic output, knocking, or oil weeping at the seal journal. A bent, cracked or scored shaft should come out before the damage spreads to the block or coupling. Việt Trung Hải is an authorized JIC Hydraulics distributor: the JIC 12T shaft is cut to the full 12-tooth spline on the factory code and meshes with the rear drive bushing as it is. Genuine shafts are stocked too. Call for the right 12T part and a fast quote.

Frequently asked questions

How is a 12T shaft different from 13T or 17T?

The number is the spline tooth count. A 12T shaft has 12 teeth and must match the coupling inside the K3V112DT pump; a 13T or 17T shaft will not fit or will strip even on the same pump family.

How does the rear shaft differ from the front shaft?

The front shaft takes drive directly from the engine; the rear shaft passes torque across to the second pump unit in a tandem pump. They sit in different positions, so order the correct rear shaft for the K3V112DT.

Do you stock the K3V112DT drive shaft?

Yes. As an authorized JIC Hydraulics distributor, Việt Trung Hải carries K3V112DT shafts in genuine and JIC, matched to the spline count and meshing with the original pump as they are. Send the 12T code and your pump model and we will confirm and quote quickly.

Get a quote

Request a quote: Rear drive shaft 12T – Kawasaki K3V112DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides