Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Rear drive shaft 12T – Kawasaki K3V140DT

Kawasaki · K3V

Rear drive shaft 12T – Kawasaki K3V140DT

New, correct codeOn request12T

Quick answer

The 12T rear drive shaft for the Kawasaki K3V140DT main pump is the rear shaft that couples drive to the second group in the tandem pump, with a 12-tooth spline. The K3V140DT powers ~30-ton excavators like the Komatsu PC300 and Hitachi ZX330.

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC shafts with a fast quote by code 12T.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Kawasaki · K3V
Model code
12T
SKU
2021-590-1-13
Condition
New, correct code
Availability
On request

Rear drive shaft for K3V140DT — 12-tooth spline (12T)

The rear drive shaft sits behind the second pump group in the K3V140DT tandem pump, coupling drive to that second group rather than taking input straight from the engine like the front shaft. This SKU is the 12-tooth spline version (code 12T); tooth count is the key selection criterion and must match your cylinder block and coupling. The shaft carries torque into the cylinder block to spin the rotary group. The K3V140DT main pump powers ~30-ton excavators such as the Komatsu PC300 and Hitachi ZX330.

When to replace

Rounded spline teeth, play under load, pump noise and pressure loss, or a worn seal journal leaking oil all mean it is time.

Choosing the right part

Việt Trung Hải supplies the 12T rear shaft in genuine and in JIC. The JIC shaft is machined on JIC Hydraulics' own code and we distribute it under authorization; splines and journals hold tolerance, so both pump groups turn evenly under load. Send code 12T and your machine model for a fast quote.

Frequently asked questions

How is the 12T rear shaft different from the front shaft?

The front shaft takes drive straight from the engine, while the rear shaft couples torque to the second pump group in the K3V140DT tandem pump. The 12T version has a 12-tooth spline; you must match both tooth count and front/rear position.

What does 12T mean?

12T is the shaft's spline tooth count — 12 teeth. It is the most important selection criterion: the spline must match the cylinder block and coupling of the K3V140DT pump so the shaft engages and transmits torque correctly.

Which excavators use the K3V140DT pump?

The Kawasaki K3V140DT main pump serves ~30-ton excavators such as the Komatsu PC300 and Hitachi ZX330. The 12T rear shaft belongs inside that pump; send code 12T and your machine model to Việt Trung Hải for a fast quote.

Get a quote

Request a quote: Rear drive shaft 12T – Kawasaki K3V140DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides