
Rear drive shaft 12T – Kawasaki K3V180DT
Quick answer
The 12T rear drive shaft is the rear-end shaft for the Kawasaki K3V180DT main pump on ~35–45 tonne excavators, with a 12-tooth spline (12T). It carries torque to the second unit in the tandem pump.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC shafts on code that fit the original pump directly, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Drive shaft
- Brand / pump line
- Kawasaki · K3V
- Model code
- 12T
- SKU
- 2021-590-1-14
- Condition
- New, correct code
- Availability
- On request
K3V180DT rear drive shaft, 12-tooth spline (12T)
The rear drive shaft couples torque through to the second unit in a Kawasaki K3V180DT tandem pump — unlike the front shaft, which takes drive straight from the engine. This is the part sold here; the K3V180DT is a piston pump used on larger excavators in the ~35–45 tonne class. The shaft carries torque into the cylinder block to spin the rotary group.
The key selection detail is spline count: this one has 12 teeth (12T). The tooth count and the front/rear end must match exactly, or the shaft will not engage.
Signs it needs replacing
Worn or pitted splines, coupling play, knocking under load, unusual vibration, or lost drive to the rear unit. Leaving a worn shaft in service damages the cylinder block and the mating shaft.
Choosing the right part
The shaft carries the full torque load, so the steel and the spline heat treatment decide its life. Việt Trung Hải distributes for JIC Hydraulics under authorization and ships the 12T rear K3V180DT shaft on the JIC code — factory steel and heat treatment, splines that mesh with the tandem coupling with no extra machining. Genuine Kawasaki shafts are stocked as well. Send the pump code and tooth count for a fast quote.
Frequently asked questions
How does the rear shaft differ from the front shaft?
The front shaft takes drive straight from the engine; the rear shaft passes torque to the second unit in the K3V180DT tandem pump. They differ in position and often in spline, so order the correct front or rear end.
What does 12T mean?
12T is the shaft spline tooth count — this one has 12 teeth. It is the key selection criterion: the count must match to engage the cylinder block and mating shaft. 12T is not a tonnage figure.
How do I confirm I need the 12T rear shaft for the K3V180DT?
Count the spline teeth and note whether it is the front or rear end on the old shaft, then match it to the K3V180DT pump code. Send photos and the tooth count to Việt Trung Hải for confirmation and a fast quote.
Get a quote
Request a quote: Rear drive shaft 12T – Kawasaki K3V180DT
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · K3VRear drive shaft 12T – Kawasaki K3V112DT12TOn requestView · get a quote
Kawasaki · K3VRear drive shaft 12T – Kawasaki K3V140DT12TOn requestView · get a quote
Kawasaki · K3VRear drive shaft 12T – Kawasaki K3V63DT12TOn requestView · get a quote
Kawasaki · K3VRotary group kit – Kawasaki K3V112DTK3V112DTOn requestView · get a quote
Kawasaki · K3VRotary group kit – Kawasaki K3V140DTK3V140DTOn requestView · get a quote
Kawasaki · K3VRotary group kit – Kawasaki K3V180DTK3V180DTOn requestView · get a quote
Kawasaki · K3VRotary group kit – Kawasaki K3V280DTK3V280DTOn requestView · get a quote
Kawasaki · K3VRotary group kit – Kawasaki K3V63DTK3V63DTOn requestView · get a quoteTechnical handbook