
Cylinder block – Kawasaki K3V63DT
Quick answer
The Kawasaki K3V63DT cylinder block holds the piston bores inside the K3V63 main pump, fitted to roughly 13-ton excavators such as the Komatsu PC120 and Kobelco SK130.
Việt Trung Hải, an authorized JIC distributor, supplies JIC and genuine blocks on the correct code with fast quotes.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Kawasaki · K3V
- Model code
- K3V63DT
- SKU
- 2021-590-1-245
- Condition
- New, correct code
- Availability
- On request
Cylinder block K3V63DT — which pump it fits
The Kawasaki K3V63DT cylinder block is the barrel holding the piston bores that rotate around the drive shaft; the pistons reciprocate to draw and discharge oil. It sits inside the K3V63 main pump, an axial-piston unit fitted to roughly 13-ton excavators such as the Komatsu PC120 and Kobelco SK130.
When to replace
Scoring, pitting or wear on the block's valve-plate face raises internal leakage, so the machine loses power, the boom lifts slowly and the oil runs hot. Worn, tapered piston bores drop pressure under load. Deep scoring usually cannot be lapped out — replace the block.
Choosing quality
Block life depends on material, surface hardness and bore machining. As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies the K3V63DT block in JIC and genuine form, all on the correct code. The JIC block holds its post-heat-treat hardness and its assembly clearances, so the pistons land where they should and the face seals from the first run. Contact us for a fast quote.
Frequently asked questions
Which excavators use the K3V63DT cylinder block?
The K3V63DT block belongs to the Kawasaki K3V63 main pump, typically fitted to roughly 13-ton excavators such as the Komatsu PC120 and Kobelco SK130. Confirm your pump code and machine model before ordering to match the exact part.
How do I know the cylinder block is worn out?
If the machine grows weak, the boom lifts slowly, oil overheats and case drain rises, the block's valve-plate face or piston bores are usually scored or worn. Inspect it together with the valve plate and pistons to judge accurately.
Does Việt Trung Hải stock the JIC K3V63DT block?
Yes. As an authorized JIC Hydraulics distributor, Việt Trung Hải carries the K3V63DT cylinder block in JIC and genuine form, all on the correct code. The JIC block goes straight into a standard housing with no boring or lapping. Contact us for a fast quote and help matching it to your pump.
Get a quote
Request a quote: Cylinder block – Kawasaki K3V63DT
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · K3VRotary group kit – Kawasaki K3V63DTK3V63DTOn requestView · get a quote
Kawasaki · K3VFront drive shaft – Kawasaki K3V63DTK3V63DTOn requestView · get a quote
Kawasaki · K3VSwash plate – Kawasaki K3V63DTK3V63DTOn requestView · get a quote
Kawasaki · K3VShoe plate – Kawasaki K3V63DTK3V63DTOn requestView · get a quote
Kawasaki · K3VRetainer plate – Kawasaki K3V63DTK3V63DTOn requestView · get a quote
Kawasaki · K3VSpring – Kawasaki K3V63DTK3V63DTOn requestView · get a quote
Kawasaki · K3VValve plate – Kawasaki K3V63DTK3V63DTOn requestView · get a quote
Kawasaki · K3VPiston – Kawasaki K3V63DTK3V63DTOn requestView · get a quoteTechnical handbook