
Cylinder block – Kawasaki K3V140DT
Quick answer
The K3V140DT cylinder block is the piston-bore barrel inside the Kawasaki K3V main pump, fitted on ~30-ton excavators such as the Komatsu PC300 and Hitachi ZX330.
Việt Trung Hải, an authorized JIC distributor, supplies JIC and genuine Kawasaki blocks on code with fast quotes.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Kawasaki · K3V
- Model code
- K3V140DT
- SKU
- 2021-590-1-242
- Condition
- New, correct code
- Availability
- On request
K3V140DT cylinder block — which pump it fits
The cylinder block is the barrel holding the piston bores that rotate around the drive shaft; pistons reciprocate inside to draw and push oil. The K3V140DT belongs to Kawasaki's K3V main-pump family used on ~30-ton excavators such as the Komatsu PC300 and Hitachi ZX330. The block runs face-to-face against the valve plate, so surface flatness and hardness govern pump flow and pressure.
Signs it needs replacing
Weak, slow lifting and lost power under load; oil heating up fast; unusual pump noise. On teardown you'll find a scored or pitted valve-plate face and worn, tapered piston bores that leak internally. Replace before damage spreads to pistons, valve plate and shaft.
Choosing quality parts
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the K3V140DT block in JIC and genuine Kawasaki form — correct material, precision-machined bores, a flat, durable running face. The JIC block is cut to factory dimensions, so it goes into the existing housing and block, pistons and valve plate turn on one axis. Right part, fast quote.
Frequently asked questions
Which excavators use the K3V140DT cylinder block?
The K3V140DT is part of the Kawasaki K3V main pump used on roughly 30-ton excavators such as the Komatsu PC300 and Hitachi ZX330. Send your machine model and pump serial and Việt Trung Hải will confirm the exact part before quoting.
How do I know the cylinder block is worn?
Common signs are a weak pump, slow lifting, lost power under load and oil that heats up quickly. On teardown, a scored valve-plate face or tapered, worn piston bores causing internal leakage mean the block should be replaced.
Can a lightly worn K3V140DT block be lapped instead of changed?
Lapping only saves a very shallow haze. Once the face is deeply scored or the bores have gone tapered, the clearance is still wrong afterwards and the pump loses pressure again within hours. Fitting the correct code is the safer call. Việt Trung Hải is an authorized JIC Hydraulics distributor carrying JIC and genuine Kawasaki blocks, with a fast quote.
Get a quote
Request a quote: Cylinder block – Kawasaki K3V140DT
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · K3VRotary group kit – Kawasaki K3V140DTK3V140DTOn requestView · get a quote
Kawasaki · K3VPiston pump – Kawasaki K3V140DTK3V140DTOn requestView · get a quote
Kawasaki · K3VSwash plate – Kawasaki K3V140DTK3V140DTOn requestView · get a quote
Kawasaki · K3VShoe plate – Kawasaki K3V140DTK3V140DTOn requestView · get a quote
Kawasaki · K3VRetainer plate – Kawasaki K3V140DTK3V140DTOn requestView · get a quote
Kawasaki · K3VSpring – Kawasaki K3V140DTK3V140DTOn requestView · get a quote
Kawasaki · K3VValve plate – Kawasaki K3V140DTK3V140DTOn requestView · get a quote
Kawasaki · K3VPiston – Kawasaki K3V140DTK3V140DTOn requestView · get a quoteTechnical handbook