Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Fixed shaft – Kawasaki KVC925

Kawasaki · KVC

Fixed shaft – Kawasaki KVC925

New, correct codeOn requestKVC925

Quick answer

The Kawasaki KVC925 drive shaft transmits engine torque into the cylinder block of the KVC925 main pump used on large crawler excavators.

Việt Trung Hải supplies KVC925 shafts — genuine Kawasaki and JIC Hydraulics, correct code and spline, ready to fit — with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Kawasaki · KVC
Model code
KVC925
SKU
2021-590-1-221
Condition
New, correct code
Availability
On request

What the KVC925 drive shaft fits

The KVC925 drive shaft is the drive/input shaft for the Kawasaki KVC925 main pump. It carries torque from the engine into the cylinder block and turns the rotary group. The shaft is splined to the block, so matching the exact code (KVC925) and the correct spline tooth count keeps the coupling tight and free of play. The KVC925 is an axial-piston main pump used on large-class crawler excavators.

When to replace

Check the shaft for knocking or vibration under throttle, worn or chipped splines that cause backlash, or a scored seal journal that leaks oil. Worn splines lose torque, so the pump runs weak and hot.

Choosing quality

The shaft carries the full drive torque, so steel grade, heat treatment and spline machining decide its life. Việt Trung Hải supplies KVC925 shafts — genuine Kawasaki and JIC Hydraulics; as JIC's authorized distributor we ship shafts cut to the correct code and spline at both ends, so the coupling drives without backlash. Contact us for a fast quote.

Frequently asked questions

Which pump and machine does the KVC925 drive shaft fit?

It is the drive shaft for the Kawasaki KVC925 axial-piston main pump used on large crawler excavators. When ordering, send the pump code and spline tooth count so we match the correct shaft.

How do I know the drive shaft is worn?

Common signs are knocking or vibration under throttle, worn splines that cause play and weak pump output, or a scored seal journal that leaks oil. If you see these, pull the pump and inspect the shaft and splines.

How do I pick the right KVC925 shaft for my pump?

Check the pump code on the nameplate, the spline tooth count at each end and the shaft length; a photo of the old shaft speeds it up. Việt Trung Hải stocks genuine Kawasaki and JIC Hydraulics shafts to the KVC925 code — we are JIC's authorized distributor — and quotes as soon as the code is confirmed.

Get a quote

Request a quote: Fixed shaft – Kawasaki KVC925

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides