
Front drive shaft 17T – Kawasaki K3V180DTH
Quick answer
The 17T front drive shaft is the 17-spline input shaft for the Kawasaki K3V180DTH main pump, typically fitted on 35–45 tonne excavators. It takes drive from the engine and transmits torque into the cylinder block.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC shafts cut to the same code, fitting straight into the pump, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Drive shaft
- Brand / pump line
- Kawasaki · K3V
- Model code
- 17T
- SKU
- 2021-590-1-26
- Condition
- New, correct code
- Availability
- On request
Front drive shaft with a 17-tooth spline (17T) for the Kawasaki K3V180DTH main pump. This is the front, or input, shaft: it takes drive straight from the engine and passes torque into the cylinder block to turn the rotary group. Tooth count is the key selection criterion — it must be a 17-spline front shaft to fit.
Which pump it fits
The K3V180DTH is the main piston pump on large excavators, typically the 35–45 tonne class. The 17T front shaft engages the coupling from the engine, unlike the rear shaft that links to the second pump group in a tandem set. Confirm front position and the 17-spline count when ordering.
Signs of wear
Worn or rounded splines cause backlash and drive slip; a bent shaft, scored journal or worn seal seat brings oil leaks and vibration. Replace early to protect the block and rotary group.
Choosing quality parts
Việt Trung Hải distributes for JIC Hydraulics: the JIC shaft for the K3V180DTH is machined to the same code, tooth count and journal sizes, so it slides into the original pump housing with no reworking. Genuine Kawasaki shafts are on the shelf too. Call for the right part and a fast quote.
Frequently asked questions
How is the 17T front shaft different from the rear shaft?
The front shaft sits at the input end and takes drive straight from the engine, while the rear shaft links to the second pump group in a tandem set. When ordering, state front or rear and confirm the 17-tooth spline.
What does 17T mean on the drive shaft?
17T is the spline tooth count of the shaft — 17 teeth. It is the most important selection criterion: the shaft must have 17 splines to mesh with the cylinder block and coupling. It is not a tonnage figure.
Which excavators use the K3V180DTH pump?
The K3V180DTH is the main piston pump in the Kawasaki K3V180 family, typically on large excavators in the 35–45 tonne class. The 17T front drive shaft is the input shaft of that pump group, and Việt Trung Hải stocks it genuine and JIC, to the same code.
Get a quote
Request a quote: Front drive shaft 17T – Kawasaki K3V180DTH
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · K3VFront drive shaft 17T – Kawasaki K3V180DT17TOn requestView · get a quote
Kawasaki · K3VRotary group kit – Kawasaki K3V112DTK3V112DTOn requestView · get a quote
Kawasaki · K3VRotary group kit – Kawasaki K3V140DTK3V140DTOn requestView · get a quote
Kawasaki · K3VRotary group kit – Kawasaki K3V180DTK3V180DTOn requestView · get a quote
Kawasaki · K3VRotary group kit – Kawasaki K3V280DTK3V280DTOn requestView · get a quote
Kawasaki · K3VRotary group kit – Kawasaki K3V63DTK3V63DTOn requestView · get a quote
Kawasaki · K3VPiston pump – Kawasaki K3V112DTK3V112DTOn requestView · get a quote
Kawasaki · K3VPiston pump – Kawasaki K3V140DTK3V140DTOn requestView · get a quoteTechnical handbook