
Front drive shaft 17T – Kawasaki K3V180DT
Quick answer
The 17T front drive shaft is the 17-tooth input shaft of the Kawasaki K3V180DT main pump — taking drive from the engine on large excavators around 35–45 tonnes.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies genuine and JIC shafts to the same code, with fast quotes and help matching tooth count and front/rear position.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Drive shaft
- Brand / pump line
- Kawasaki · K3V
- Model code
- 17T
- SKU
- 2021-590-1-25
- Condition
- New, correct code
- Availability
- On request
Front drive shaft 17T for the Kawasaki K3V180DT pump
The front drive shaft is the pump's input shaft — it takes drive from the engine and carries torque into the cylinder block to spin the rotary group. It is a 17-tooth spline (code 17T). What sets it apart from sibling shafts is the tooth count and position: this is the front shaft, not the rear shaft that couples to the second unit in a tandem pump. The spline must match the block, so count the teeth first. It fits the Kawasaki K3V180DT main pump, used on large excavators in the ~35–45 tonne class.
When to replace
Worn or rounded spline teeth, slip under load, shaft wobble or noise at the input, or a scored seal journal that leaks. Replace early to avoid ruining the cylinder block.
Choosing quality parts
Material, heat treatment and spline machining decide the shaft's life. Việt Trung Hải supplies the 17T front shaft for the K3V180DT as genuine Kawasaki and as JIC Hydraulics — we distribute for JIC, and the JIC shaft is machined to the same code with the full 17-tooth spline, so the original pump takes full torque again. Fast quotes, with help matching tooth count and front/rear position.
Frequently asked questions
How does the 17T front shaft differ from the rear shaft?
The front shaft is the input, taking drive straight from the engine; the rear shaft couples to the second unit in a tandem pump. They also differ in spline tooth count, so confirm the position and count the teeth before ordering.
What does 17T mean?
17T is the shaft's spline tooth count — 17 teeth. It is the most important selection criterion because the spline must engage the cylinder block correctly; it is not a machine tonnage. Count the teeth on your old shaft to compare.
Which excavator class uses the K3V180DT pump?
The Kawasaki K3V180DT is a piston main pump used on large crawler excavators in roughly the 35–45 tonne class. Việt Trung Hải supplies the correct 17T front shaft for it, genuine and JIC, with fast quotes.
Get a quote
Request a quote: Front drive shaft 17T – Kawasaki K3V180DT
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · K3VFront drive shaft 17T – Kawasaki K3V180DTH17TOn requestView · get a quote
Kawasaki · K3VRotary group kit – Kawasaki K3V112DTK3V112DTOn requestView · get a quote
Kawasaki · K3VRotary group kit – Kawasaki K3V140DTK3V140DTOn requestView · get a quote
Kawasaki · K3VRotary group kit – Kawasaki K3V180DTK3V180DTOn requestView · get a quote
Kawasaki · K3VRotary group kit – Kawasaki K3V280DTK3V280DTOn requestView · get a quote
Kawasaki · K3VRotary group kit – Kawasaki K3V63DTK3V63DTOn requestView · get a quote
Kawasaki · K3VPiston pump – Kawasaki K3V112DTK3V112DTOn requestView · get a quote
Kawasaki · K3VPiston pump – Kawasaki K3V140DTK3V140DTOn requestView · get a quoteTechnical handbook