
Cylinder block – Kayaba PSV2 55T
Quick answer
The Kayaba (KYB) PSV2-55T cylinder block is the piston barrel of the PSV2 main pump, fitted on excavators around the 13–16 tonne class.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC blocks cut to the PSV2 code and to interchange tolerance, and quotes fast.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Kayaba (KYB) · PSV
- Model code
- PSV2
- Condition
- New, correct code
- Availability
- On request
The cylinder block is the barrel holding the piston bores that rotate around the drive shaft, where pistons reciprocate to move oil — the most load-bearing, wear-prone part of a piston pump.
What the Kayaba PSV2-55T block fits
This block belongs to the Kayaba (KYB) PSV2-55T main pump, a piston-pump family used on excavators around the 13–16 tonne class. It runs against the valve plate, so its sealing face and bores set the pump's tightness and output.
Signs of wear
A weak, slow, or overheating machine often means internal leakage: a scored or glazed valve-plate face, scratched or slack piston bores, whine and vibration. Once the sealing face is gone, lapping rarely lasts — replace the block with its pistons and valve plate.
Genuine-quality parts
Việt Trung Hải, an authorized JIC Hydraulics distributor, stocks genuine blocks and JIC blocks for the KYB PSV2-55T: correct material and heat treatment, precision-machined bores and running face, and interchange tolerances held to the PSV2 code, so the block seats in the original pump housing with no lapping or honing. Send the PSV2 code for a fast quote.
Frequently asked questions
Which excavators use the PSV2-55T block?
It is the cylinder block for the Kayaba PSV2-55T main pump, a piston pump typically found on excavators around the 13–16 tonne class. Send your machine model and pump number so we confirm the exact version before quoting.
Replace only the block, or the pistons and valve plate too?
Block, pistons, and valve plate wear as a set. If the sealing face is scored or the bores are slack, replacing them together keeps the pump tight and durable; single-part swaps often leak again. We advise based on the actual condition.
Are JIC parts for the PSV2-55T the correct fit?
Yes. Việt Trung Hải is an authorized JIC Hydraulics distributor, and the JIC PSV2 block is machined to the code, on interchange tolerance with the original pistons, valve plate and drive shaft. Send the pump code for a fast quote.
Get a quote
Request a quote: Cylinder block – Kayaba PSV2 55T
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kayaba (KYB) · PSVRotary group – Kayaba PSV2-55TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRotary group – Kayaba PSV2-60TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRotary group – Kayaba PSV2-63TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSV2 55TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSV2 60TPSV2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSV2 63TPSV2On requestView · get a quote
Kayaba (KYB) · PSVValve plate – Kayaba PSV2 55TPSV2On requestView · get a quote
Kayaba (KYB) · PSVValve plate – Kayaba PSV2 60TPSV2On requestView · get a quoteTechnical handbook