Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Kawasaki KVC925

Kawasaki · KVC

Cylinder block – Kawasaki KVC925

New, correct codeOn requestKVC925

Quick answer

The KVC925 cylinder block holds the rotating piston bores in the Kawasaki KVC-series main pump used on medium-to-large excavators, and is one of its highest-wear parts.

Việt Trung Hải, an authorized JIC distributor, supplies genuine and JIC blocks on the correct part code, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Kawasaki · KVC
Model code
KVC925
SKU
2021-590-1-251
Condition
New, correct code
Availability
On request

The KVC925 cylinder block is the barrel holding the piston bores that rotate around the drive shaft, where pistons reciprocate to move oil. It is the highest-wear part inside the Kawasaki KVC-series main piston pump, which powers medium to large hydraulic excavators.

Fitment

The block rotates against the valve plate. The flatness of its port face and the seal of each piston bore set the pressure and flow the pump can deliver.

When to replace

Watch for scored, pitted or heat-discoloured port faces, worn piston bores that leak and rob power, abnormal pump heat and noise, or metal debris in the hydraulic oil.

Choosing quality

As an authorized JIC Hydraulics distributor, Việt Trung Hải supplies the KVC925 block in JIC and genuine form: heat-treated alloy steel, bores and port face machined to the tolerances that code carries, for a tight seal under high load. The JIC block goes straight into a standard KVC housing on the right clearance, so the group runs evenly and comes back less often. Contact us for a fast quote.

Frequently asked questions

Which excavators use the KVC925 cylinder block?

It is part of the Kawasaki KVC-series axial-piston main pump fitted to medium-to-large hydraulic excavators. To confirm the exact machine and pump version, send us your pump code or a photo of the pump nameplate and we will verify it.

How do I know the cylinder block is worn?

Common signs are pressure loss, a weak machine that lifts slowly under load, abnormal pump heat and noise, or metal debris in the oil. On teardown, a scored or pitted port face and worn piston bores confirm the block needs replacing.

Will a JIC KVC925 block fit a standard pump housing?

It will. The JIC block is made on the KVC925 code in heat-treated alloy steel, with bores and port face held to original fit tolerances, so the clearance is right in the existing housing — no boring, no lapping. As an authorized JIC distributor, Việt Trung Hải ships the correct code and quotes fast.

Get a quote

Request a quote: Cylinder block – Kawasaki KVC925

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides