Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Cylinder block – Kawasaki K5V140DT

Kawasaki · K5V

Cylinder block – Kawasaki K5V140DT

New, correct codeOn requestK5V140DT

Quick answer

The K5V140DT cylinder block is the barrel holding the rotating piston bores in the Kawasaki K5V main pump, fitted on roughly 20-tonne excavators such as the Kobelco SK210 and Doosan DX225.

Việt Trung Hải, an authorized JIC distributor, supplies JIC and genuine blocks on code with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Cylinder block
Brand / pump line
Kawasaki · K5V
Model code
K5V140DT
SKU
2021-590-1-246
Condition
New, correct code
Availability
On request

Cylinder block for the Kawasaki K5V140DT pump

The cylinder block holds the piston bores that rotate around the drive shaft; pistons reciprocate inside them to draw and deliver oil. The K5V140DT block belongs to the Kawasaki K5V main pump used on roughly 20-tonne excavators such as the Kobelco SK210 and Doosan DX225, so its surface accuracy governs pump flow and pressure.

When to replace

Watch for a scored, pitted or worn valve-plate face and loose piston bores that let oil slip past. On the machine this shows as weak lifting, power loss at end of stroke, fast oil heating and a noisy pump. Deep scoring rarely laps out; a new block restores the seal.

Choosing quality

Việt Trung Hải is an authorized JIC Hydraulics distributor supplying the K5V140DT block in JIC form: hardened steel, running face and bores machined to the dimensions of that code, steady under continuous load. It sits in a standard K5V housing on the right clearance, so the group runs true. Genuine blocks are stocked as well. Contact us for the exact K5V140DT and a fast quote.

Frequently asked questions

Which excavators use the K5V140DT cylinder block?

It is the block for the Kawasaki K5V main pump, fitted on roughly 20-tonne excavators such as the Kobelco SK210 and Doosan DX225. Share your pump code and machine model so Việt Trung Hải can confirm the correct part.

When should I replace the block instead of lapping it?

Light dullness on the running face can often be lapped. But once there is deep scoring, pitting or loose piston bores causing weak pump output and fast oil heating, lapping will not seal it; replace the block to restore flow and pressure.

Do I need new pistons when I change a K5V140DT block?

If the pistons are still inside tolerance and the ball feet are not loose, they can go back in — but measure each one. Scored or tapered pistons should be changed as a set with the block so the group runs true. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies blocks and rotating kits on code with a fast quote.

Get a quote

Request a quote: Cylinder block – Kawasaki K5V140DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides