Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Front drive shaft 14T – Kawasaki K3V112DT

Kawasaki · K3V

Front drive shaft 14T – Kawasaki K3V112DT

New, correct codeOn request14T

Quick answer

The 14T front drive shaft for the Kawasaki K3V112DT is the 14-tooth input shaft that takes drive from the engine and feeds torque into the main pump on ~20-tonne excavators like the PC200, SK200, ZX200 and DX225.

Việt Trung Hải stocks genuine and JIC shafts cut to the 14T code, with a code check and a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Kawasaki · K3V
Model code
14T
SKU
2021-590-1-23
Condition
New, correct code
Availability
On request

14T front drive shaft for the Kawasaki K3V112DT pump

This is the front (input) drive shaft with a 14-tooth spline (code 14T). It takes drive straight from the engine and carries torque into the cylinder block to turn the pump's rotary group. Tooth count is the key selection criterion — 14T must match the block and coupling exactly, not a 12T or 13T. It drives the Kawasaki K3V112DT main pump found on roughly 20-tonne excavators such as the Komatsu PC200, Kobelco SK200, Hitachi ZX200 and Doosan DX225.

When to replace

Weak flow, pressure loss or vibration under throttle often trace to a worn or stripped input spline. Knocking at the coupling, metal fines or pitting on the spline grooves mean it is time to change the shaft.

Choosing the right part

Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the 14T front shaft for the K3V112DT as genuine Kawasaki and as JIC — both cut with the full 14-tooth spline and surface-hardened, so the engine coupling engages straight away. Call VTH to confirm the code and get a fast quote.

Frequently asked questions

How is the 14T front shaft different from the rear shaft or a 12T/13T?

The front shaft is the input shaft driven by the engine; the rear shaft couples to the second pump group. 14T means 14 spline teeth — you must match the tooth count exactly, as a 12T or 13T will not fit the K3V112DT block and coupling.

Which excavators does this shaft fit?

It drives the Kawasaki K3V112DT main pump used on roughly 20-tonne excavators such as the Komatsu PC200, Kobelco SK200, Hitachi ZX200 and Doosan DX225. Check the pump code and spline tooth count against your unit before ordering to be sure of the fit.

Do you stock genuine parts and how do I get a quote?

Yes. Việt Trung Hải carries genuine Kawasaki shafts and JIC shafts for the K3V112DT — as an authorized JIC Hydraulics distributor we supply JIC's own parts, machined to the same code. Send the pump code, front/rear position and the 14T tooth count, and VTH will confirm the right shaft and quote quickly.

Get a quote

Request a quote: Front drive shaft 14T – Kawasaki K3V112DT

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides