Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Piston pump – Kawasaki K3V280

Kawasaki · K3V

Piston pump – Kawasaki K3V280

New, correct codeOn requestK3V280

Quick answer

The Kawasaki K3V280 is the main axial piston pump that supplies high-pressure oil across large crawler excavators in the ~50-ton-and-up class.

Việt Trung Hải supplies the K3V280 and JIC parts machined to the correct code and fitting tolerance, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Piston pump
Brand / pump line
Kawasaki · K3V
Model code
K3V280
Condition
New, correct code
Availability
On request

What the K3V280 pump fits

The Kawasaki K3V280 is a variable-displacement, swash-plate axial piston pump — the main pump driven straight off the engine, feeding high-pressure oil to the boom, arm, bucket, swing and travel. It is the main pump for large crawler excavators in the ~50-ton-and-up class, with flow set by the swash plate and regulator.

Signs it needs service

A worn pump shows up as weak lifting and slow swing, sluggishness under heavy load, oil overheating, abnormal noise, vibration, or shaft-seal leaks. Metal particles in the oil usually point to scored pistons, cylinder block or valve plate.

Genuine-quality parts

These parts run at very high pressure with tight tolerances, so material and machining decide durability. JIC builds K3V280 parts to the correct code and fitting tolerance, holding the working clearance inside the standard pump housing. Việt Trung Hải, an authorized JIC Hydraulics distributor, quotes fast.

Frequently asked questions

Which excavator class does the K3V280 fit?

The K3V280 is a Kawasaki main pump for large crawler excavators, roughly the 50-ton-and-up class. Because there are several variants by machine model, send us your old pump code and machine details so we can confirm the right one.

How do I know the K3V280 main pump is failing?

Common signs are weak, slow boom lift and swing, sluggishness under heavy load, fast oil heating, and pump noise or vibration. Metal particles in the hydraulic oil are a red flag — check the pump promptly to avoid further damage.

Weak K3V280 — rebuild the rotary group or fit a whole pump?

If the housing, shaft and regulator are sound, a JIC rotary group made to the K3V280 code brings the working clearance back to spec while keeping the original casing. A cracked housing, a shaft with play or a pitted swash plate calls for a complete pump. Việt Trung Hải carries genuine and JIC parts and quotes fast.

Get a quote

Request a quote: Piston pump – Kawasaki K3V280

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides