
Cylinder block – Kawasaki M2X120
Quick answer
The Kawasaki M2X120 cylinder block is the rotating piston barrel that generates swing torque inside the M2X120 swing motor, fitted on medium ~20-tonne excavators. Viet Trung Hai has genuine and JIC blocks on the shelf, cut to the same code and ready to assemble into the original motor, with fast quotes.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Kawasaki · M2X
- Model code
- M2X120
- SKU
- 2021-590-1-253
- Condition
- New, correct code
- Availability
- On request
Kawasaki M2X120 cylinder block — what it fits
The cylinder block is the barrel holding the piston bores that rotate around the drive shaft, where pistons reciprocate to move oil. Inside the Kawasaki M2X120 swing motor — used on medium excavators around the 20-tonne class — the block is what generates swing torque. Its valve-plate face and bore sealing set swing speed and power.
Signs it needs replacing
As the block wears, internal leakage rises: weak or slow swing, jerky start, swing drift on a slope, and abnormal heat. Scoring, pitting, burn discoloration on the face, or metal in the oil mean it is time to replace.
Choosing quality
Load and heat never let up on a cylinder block, so material, surface hardness and bore accuracy decide its life. Viet Trung Hai, an authorized JIC Hydraulics distributor, has M2X120 blocks on the shelf in JIC and genuine Kawasaki form. The JIC block is cut to the same code, its splines and bores matching the original motor shaft, so it assembles at the correct working clearance. Contact us for a fast quote.
Frequently asked questions
What machine does the M2X120 fit?
The M2X120 is a Kawasaki swing motor used on medium excavators around the 20-tonne class. The cylinder block sits inside this motor; when ordering, share your machine model and motor number so we match the correct version.
Replace just the block or the whole swing motor?
If only the cylinder block is scored or lightly worn, it can be replaced along with the pistons and valve plate. When the shaft, housing, or brake are also damaged, a full overhaul kit or complete motor may be wiser. Send photos for advice.
Does a JIC block need any modification to fit the M2X120 swing motor?
No. Viet Trung Hai is an authorized JIC Hydraulics distributor; the JIC M2X120 block is machined to the same code, with splines and bores matching the original motor shaft, so it goes together at the correct working clearance. Genuine Kawasaki blocks are on the shelf as well.
Get a quote
Request a quote: Cylinder block – Kawasaki M2X120
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · M2XSwing motor rotary group – Kawasaki M2X120M2X120On requestView · get a quote
Kawasaki · M2XShoe plate – Kawasaki M2X120M2X120On requestView · get a quote
Kawasaki · M2XRetainer plate – Kawasaki M2X120M2X120On requestView · get a quote
Kawasaki · M2XFriction lining – Kawasaki M2X120M2X120On requestView · get a quote
Kawasaki · M2XValve plate – Kawasaki M2X120M2X120On requestView · get a quote
Kawasaki · M2XPin – Kawasaki M2X120M2X120On requestView · get a quote
Kawasaki · M2XPiston – Kawasaki M2X120M2X120On requestView · get a quote
Kawasaki · M2XBall guide – Kawasaki M2X120M2X120On requestView · get a quoteTechnical handbook