
Piston ring – Rexroth-Uchida A8VO107
Quick answer
The A8VO107 piston ring seals around the piston on the bent-axis Rexroth-Uchida A8VO main pump used on roughly 20-tonne excavators, holding pressure and preventing internal oil leakage.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC rings on code that seal in the original groove, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Piston
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8VO107
- Condition
- New, correct code
- Availability
- On request
What the A8VO107 piston ring fits
The piston ring seals around the pump piston, holding oil in the compression chamber and blocking leakage across the gap between the piston and the cylinder-block bore. On the bent-axis Rexroth-Uchida A8VO107 main pump — a tandem unit for roughly 20-tonne excavators — each tapered piston relies on this ring to hold pressure through the stroke.
When to replace
A worn, scored, or fatigued ring raises internal leakage: weak pump, slow controls, loss of lifting power under load, and oil heating up faster. Pistons and rings often score together, leaving metal debris in the oil.
Genuine-quality parts
The A8VO107 rings are made by JIC Hydraulics and distributed by Việt Trung Hải under authorization — correct size, material and hardness, sealing in the original groove and bore as fitted. Contact us for a fast quote.
Frequently asked questions
Which excavator does the A8VO107 piston ring fit?
It seals the pistons in the bent-axis Rexroth-Uchida A8VO107 main pump, an A8VO-series unit typically fitted to roughly 20-tonne excavators. Tell us your machine model and pump number and Việt Trung Hải will confirm the exact part before quoting.
When should the A8VO107 piston rings be replaced?
Replace them when the pump feels weak, controls slow down, lifting power drops under load, and oil overheats — signs of a worn or scored ring leaking internally. Check the pistons too and replace the set together for steady pressure.
Does the pump have to come apart to change A8VO107 rings?
Yes — the rotating group has to come out before the pistons can be pulled and the rings changed. With it open, check the bores, the valve plate and the shoes at the same time. Việt Trung Hải ships JIC A8VO107 rings on code and stocks the rest of the rotating group.
Get a quote
Request a quote: Piston ring – Rexroth-Uchida A8VO107
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8VO107A8VO107On requestView · get a quote
Uchida/Rexroth · A8VODrive shaft – Rexroth A8VO107A8VO107On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8VO107A8VO107On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth-Uchida A8VO107A8VO107On requestView · get a quote
Uchida/Rexroth · A8VOCylinder block – Rexroth A8VO107A8VO107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V80A8V80On requestView · get a quoteTechnical handbook