Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Piston – Rexroth-Uchida A8VO107

Uchida/Rexroth · A8VO

Piston – Rexroth-Uchida A8VO107

New, correct codeOn requestA8VO107

Quick answer

The A8VO107 piston is the reciprocating part inside the cylinder block of the Rexroth (Uchida) A8VO main pump, used on roughly 20-ton excavators.

Việt Trung Hải supplies JIC A8VO107 pistons on code that reach the right clearance in the original bore, with fast quotes.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Piston
Brand / pump line
Uchida/Rexroth · A8VO
Model code
A8VO107
Condition
New, correct code
Availability
On request

What the A8VO107 pump piston fits

The piston is the reciprocating part running inside the cylinder block bores of an axial piston pump. Each piston rides the swash plate through a slipper; as the block rotates, the pistons draw and push oil to build flow and pressure. The A8VO107 belongs to the Rexroth (Uchida) A8VO main pump family, fitted on roughly 20-ton crawler excavators.

Signs of wear

Scored or scuffed piston surfaces, flaked coating, or a loose slipper-ball joint mean internal leakage rises and pump output falls: slow controls, weak lifting, hot oil, metal flakes in the fluid. Left too long, a piston can seize and damage the whole cylinder block.

Choosing quality

Pistons must match the code, the alloy and the surface finish to seal against the bore. The A8VO107 pistons on our shelf come straight from JIC Hydraulics through the authorized channel Việt Trung Hải holds — cut to code, reaching the right clearance in the original bore with no hand fitting. Fast quotes.

Frequently asked questions

Which pump and machine use the A8VO107 piston?

The A8VO107 piston belongs to the Rexroth (Uchida) A8VO main pump, typically fitted on roughly 20-ton crawler excavators. Replace pistons as a matched set and inspect the cylinder block and slippers at the same time.

How do I know the pump pistons are worn?

Common signs are weak flow, sluggish controls, loss of lifting power, fast oil heating, and metal flakes in the fluid. Inspect piston surfaces and slipper joints for scoring, play, or flaked coating.

Do I have to change the cylinder block when I change A8VO107 pistons?

It depends on the bores. If they are still round and free of deep scoring, JIC pistons on the A8VO107 code give the right clearance on their own. Tapered or badly scored bores call for the block and shoes too. Việt Trung Hải stocks the whole group — send photos and we will advise.

Get a quote

Request a quote: Piston – Rexroth-Uchida A8VO107

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides