
Drive shaft – Rexroth A8VO200
Quick answer
The A8VO200 drive shaft carries engine torque into the cylinder block of the Rexroth (Uchida) A8VO200 main pump, fitted on roughly 35-ton crawler excavators.
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the A8VO200 shaft in genuine and JIC, machined to code and fitting the original housing, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Drive shaft
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8VO200
- Condition
- New, correct code
- Availability
- On request
What the A8VO200 drive shaft fits
The drive shaft transmits engine torque into the cylinder block to spin the pump's rotary group. This one belongs to the Rexroth (Uchida) A8VO200 main pump — a variable axial-piston pump used on roughly 35-ton crawler excavators. The splined nose meshes with the cylinder block, where torsional load peaks at high working pressure.
When to replace
Watch for worn or pitted splines, play that makes the pump whine or vibrate under load, a scored seal surface leaking oil at the shaft nose, or a twisted shaft causing unstable flow. Replace early to protect the cylinder block and the rest of the pump.
Choosing quality parts
Correct spline profile and surface hardness are what make a shaft last. JIC stock reaches Việt Trung Hải through our authorized JIC Hydraulics distribution, cut to the A8VO200 code and interchange tolerance, so it seats in the original housing untouched. Genuine shafts are held to the same fit. Contact us for a fast quote.
Frequently asked questions
Which excavator uses the A8VO200 drive shaft?
It drives the Rexroth (Uchida) A8VO200 main pump, an axial-piston pump found on roughly 35-ton crawler excavators. Việt Trung Hải helps you match the correct shaft to your pump and machine model.
When should the drive shaft be replaced?
Replace it when the splines are worn or loose enough to cause whine and vibration, when a scored nose leaks oil at the seal, or when a twisted shaft makes flow unstable. Changing it early keeps the cylinder block out of trouble.
Does Việt Trung Hải stock the A8VO200 drive shaft?
Yes. As an authorized JIC Hydraulics distributor, Việt Trung Hải holds the A8VO200 shaft in genuine and JIC, each on the correct code and fitting the original housing as it is. Send your pump code for a fast quote and stock check.
Get a quote
Request a quote: Drive shaft – Rexroth A8VO200
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth-Uchida A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VOPiston ring – Rexroth-Uchida A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VOCylinder block – Rexroth A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V80A8V80On requestView · get a quoteTechnical handbook