
Piston ring – Rexroth-Uchida A8VO200
Quick answer
The A8VO200 piston-ring is the piston and sealing-ring set for the Rexroth-Uchida A8VO bent-axis main pump, typically fitted on ~35-ton excavators. Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies JIC sets cut to the same code and fitting tolerance, so they seat in the original bore at the right working clearance. Genuine Rexroth is stocked too, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Piston
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8VO200
- Condition
- New, correct code
- Availability
- On request
What the A8VO200 piston-ring fits
The piston reciprocates inside the cylinder bore, turning shaft rotation into hydraulic flow and pressure; the piston ring seals the piston-to-bore clearance and keeps the pump's volumetric efficiency. The A8VO200 piston-ring belongs to the Rexroth-Uchida A8VO bent-axis main pump family, typically fitted on excavators around 35 tons.
When to replace
Watch for scored, pitted or worn pistons, cracked or fatigued rings, internal leakage, weak pump output, a slow or underpowered machine, and fast-heating oil. Together these usually mean the piston-to-bore clearance has opened past its limit.
Choosing quality parts
Material, surface hardness and machining tolerance decide service life under high pressure. Việt Trung Hải is an authorized JIC Hydraulics distributor: the JIC A8VO200 piston-ring set is cut to the same code and the same fitting tolerance, so it drops into the original bore at the working clearance a new pump had, with no honing and no bench work. Genuine Rexroth sits on the same shelf. Contact us for a fast quote.
Frequently asked questions
Which excavator does the A8VO200 piston-ring fit?
The A8VO200 piston-ring is for the Rexroth-Uchida A8VO bent-axis main pump, typically used on excavators around 35 tons. Việt Trung Hải verifies the exact pump code before shipping so the part fits.
When should the piston and rings be replaced?
Replace them when pistons are scored or worn, rings are cracked or have lost tension causing internal leakage, the pump is weak, the machine slows and oil heats up fast. These signs mean the piston-to-bore clearance is out of spec.
Do I have to hone the bore to fit a JIC A8VO200 piston-ring set?
No. The JIC A8VO200 set is cut to the same code and fitting tolerance, so it seats in the original bore at the correct working clearance with no honing and no lapping. Việt Trung Hải is an authorized JIC Hydraulics distributor and also stocks genuine Rexroth. Contact us for advice and a fast quote.
Get a quote
Request a quote: Piston ring – Rexroth-Uchida A8VO200
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VODrive shaft – Rexroth A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth-Uchida A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VOCylinder block – Rexroth A8VO200A8VO200On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V80A8V80On requestView · get a quoteTechnical handbook