Skip to main content

Heavy-equipment parts · Hydraulic pumps · Rotary groups · Machinery

Hồ Chí Minh(+8428) 3898 2851
Drive shaft – Kayaba MSF340

Kayaba (KYB) · MSF

Drive shaft – Kayaba MSF340

New, correct codeOn requestMSF340

Quick answer

The Kayaba MSF340 drive shaft transmits torque inside a Kayaba (KYB) MSF-series swing motor used on large-class excavators.

Việt Trung Hải supplies the MSF340 in genuine and JIC form, cut to code and ready to mesh in the original motor housing, with a fast quote.

Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.

Part type
Drive shaft
Brand / pump line
Kayaba (KYB) · MSF
Model code
MSF340
Condition
New, correct code
Availability
On request

What the Kayaba MSF340 drive shaft fits

The Kayaba (KYB) MSF340 drive shaft is the transmission shaft for a Kayaba MSF-series swing motor. It carries torque through the cylinder block to turn the rotary group, converting oil pressure into slew rotation. The MSF340 is a large-frame swing motor used on heavy-class excavators.

When to replace

Watch for worn or rounded splines that make the slew jerk or slip, scoring and pitting on the bearing journals, a wear groove on the seal contact surface causing leaks, or vibration and noise from a bent shaft. Replace with the correct code before damage spreads to the bearings and block.

Choosing quality parts

Việt Trung Hải is an authorized JIC Hydraulics distributor. The JIC MSF340 shaft uses good steel, surface hardening and precise spline machining to the code, holding hardness and clearance under continuous slew load — it meshes in the original motor housing as it comes. Genuine shafts are on the shelf too. We supply the correct code with a fast quote.

Frequently asked questions

What does the MSF340 drive shaft fit?

It is the transmission shaft for a Kayaba (KYB) MSF-series swing motor, a large-frame unit used on heavy excavators. The shaft carries torque to rotate the group for slew motion. Việt Trung Hải supplies the correct MSF340 code with a fast quote.

How do I know the drive shaft needs replacing?

Look for worn splines causing play and jerky slew, scored or pitted bearing journals, a wear groove on the seal surface that leaks, or vibration and noise when slewing. Replace with the correct code early to avoid damage to bearings and the block.

Does the JIC MSF340 shaft hold its clearance under constant slewing?

Yes. Case-hardened steel and splines machined to tolerance keep the JIC MSF340 hard and true, holding its working clearance under repeated slew loads. Việt Trung Hải is an authorized JIC Hydraulics distributor.

Get a quote

Request a quote: Drive shaft – Kayaba MSF340

This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.

By sending this request you agree that Việt Trung Hải may use these details to contact you and quote, as set out in our Privacy policy.

Related parts

Technical handbook

Related guides