
Cylinder block – Rexroth A8VO55
Quick answer
The Rexroth-Uchida A8VO55 cylinder block holds the piston bores of the A8VO axial piston main pump, fitted to roughly 13-tonne tracked excavators.
Việt Trung Hải supplies genuine and JIC blocks on the correct code, seating in the original housing, with code advice and a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Uchida/Rexroth · A8VO
- Model code
- A8VO55
- Condition
- New, correct code
- Availability
- On request
The cylinder block is the barrel holding the piston bores that rotate around the drive shaft; the pistons reciprocate inside these bores to draw and push oil. In the Rexroth-Uchida A8VO55 axial piston pump, the block is the highest-wear part of the rotating group.
Which pump the A8VO55 block fits
The A8VO55 is a main pump on tracked excavators in the ~13-tonne class. The block must match the A8VO55 code: a wrong bore size or generation will not seal against the valve plate, and the pump loses pressure.
When to replace it
Scoring, pitting or burn marks on the block face, tapered piston bores, a weak and sluggish pump under load, fast-heating oil or metal particles all point to a worn block. Replace the rotating group together.
Genuine-quality parts
Việt Trung Hải is an authorized JIC Hydraulics distributor, supplying A8VO55 blocks in genuine and JIC with hardened material and precision-machined bores and faces — on the correct code, sealing against the original valve plate. Call for the right code and a fast quote.
Frequently asked questions
Which excavator does the A8VO55 block fit?
The A8VO55 is a Rexroth-Uchida axial piston pump, typically the main pump on tracked excavators in the ~13-tonne class. The block must match the A8VO55 code and generation to fit the piston bores and valve-plate face.
How do I know the block is worn?
Check the valve-plate face for scoring, pitting or burn marks and the piston bores for taper wear. A weak, sluggish pump under load, fast-heating oil or metal particles in the system all signal it is time to replace the rotating group.
Do you sell the block alone or the full rotating group?
Either way: Việt Trung Hải supplies the A8VO55 block on its own or the complete rotating group, genuine or JIC, all on code and ready to run. Contact us for advice on your pump's condition and a fast quote.
Get a quote
Request a quote: Cylinder block – Rexroth A8VO55
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Uchida/Rexroth · A8VORotary group kit – Rexroth A8VO55A8VO55On requestView · get a quote
Uchida/Rexroth · A8VOValve plate – Rexroth A8VO55A8VO55On requestView · get a quote
Uchida/Rexroth · A8VOPiston – Rexroth A8VO55A8VO55On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V107A8V107On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V55A8V55On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V80A8V80On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8V86A8V86On requestView · get a quote
Uchida/Rexroth · A8VORotary group kit – Rexroth A8VO107A8VO107On requestView · get a quoteTechnical handbook