
Kawasaki · NV
Cylinder block – Kawasaki NV172DT
Quick answer
The Kawasaki NV172DT cylinder block holds the piston bores in the NV-series axial-piston pump, used on medium-to-large hydraulic excavators and equipment.
Việt Trung Hải has JIC and genuine blocks to the correct code for each pump generation, splined for the original pump shaft, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Kawasaki · NV
- Model code
- NV172DT
- SKU
- 2021-590-1-262
- Condition
- New, correct code
- Availability
- On request
Kawasaki NV172DT cylinder block — which pump it fits
The cylinder block is the barrel holding the piston bores that rotate around the drive shaft, where pistons reciprocate to move oil. The NV172DT block belongs to Kawasaki's NV-series axial-piston main pump, used on medium-to-large hydraulic excavators and equipment. Its back face rides on the valve plate; its splined bore drives off the pump shaft.
Signs it needs replacing
A worn block shows up as low pump pressure, sluggish response, fast-heating oil and whine. Look for scoring, pitting, loss of flatness or burn marks on the valve-plate face, and worn bores that leak internally.
Choosing quality parts
Việt Trung Hải, an authorized JIC Hydraulics distributor, has NV172DT blocks in JIC and genuine form, both to the correct code for your pump generation. On the JIC block, material, heat treatment and back-face flatness are controlled and the splines are cut to tolerance, so it meshes with the original pump shaft and holds clearance under load. Contact VTH for a fast quote.
Frequently asked questions
Which pump does the NV172DT cylinder block fit?
The NV172DT block fits Kawasaki's NV-series axial-piston main pump, used on medium-to-large hydraulic excavators and equipment. If you are unsure of the exact pump version, send the pump code and photos of the assembly and VTH will check for you.
When should the block be replaced instead of resurfaced?
Light dullness on the valve-plate face can be lapped flat, but deep scoring, pitting, burn marks or worn bores that leak internally and drop pressure mean the block should be replaced so the pump recovers its flow and pressure.
Does Việt Trung Hải stock the NV172DT by pump generation?
Yes. VTH is an authorized JIC Hydraulics distributor holding JIC and genuine NV172DT blocks to the correct code, with splines and back face cut to tolerance for the original pump shaft. Send the part number and pump generation for a fast quote and technical advice.
Get a quote
Request a quote: Cylinder block – Kawasaki NV172DT
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · NVRotary group kit – Kawasaki NV172DTNV172DTOn requestView · get a quote
Kawasaki · NVSwash plate – Kawasaki NV172DTNV172DTOn requestView · get a quote
Kawasaki · NVRetainer plate – Kawasaki NV172DTNV172DTOn requestView · get a quote
Kawasaki · NVValve plate – Kawasaki NV172DTNV172DTOn requestView · get a quote
Kawasaki · NVPiston – Kawasaki NV172DTNV172DTOn requestView · get a quote
Kawasaki · NVBall guide – Kawasaki NV172DTNV172DTOn requestView · get a quote
Kawasaki · NVRotary group kit – Kawasaki NV111DTNV111DTOn requestView · get a quote
Kawasaki · NVRotary group kit – Kawasaki NV137NV137On requestView · get a quoteTechnical handbook