
Cylinder block – Kayaba PSVD2-21
Quick answer
The PSVD2-21 cylinder block holds the piston bores that rotate around the drive shaft in the Kayaba (KYB) PSVD2 main pump used on mini excavators, setting the pump pressure and flow.
Việt Trung Hải supplies the block from the pump maker and from JIC, each to the correct code and on interchange tolerance, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Kayaba (KYB) · PSV
- Model code
- PSVD2
- Condition
- New, correct code
- Availability
- On request
What the PSVD2-21 cylinder block fits
The cylinder block is the barrel holding the piston bores that rotate around the drive shaft; the pistons reciprocate inside these bores to draw and push oil. This block belongs to the Kayaba (KYB) PSVD2-21 axial-piston main pump used on mini excavators. Its face against the valve plate and its piston bores must hold tight tolerances to keep pressure and flow.
When to replace it
A worn block makes the pump weak: slow boom, swing or travel, hot oil and noise under load. Scored or pitted faces, tapered bores and internal leakage all cut efficiency. Deep scoring or heat discoloration means replacing the block rather than lapping it.
Choosing quality parts
Việt Trung Hải, an authorized JIC Hydraulics distributor, supplies the PSVD2-21 block from the pump maker and from JIC, each to the correct code. Material, heat treatment and bore machining give the hardness and finish the job needs, and the clearance against the pistons and valve plate sits on interchange tolerance, so the block runs steady in the original housing under high load. Send your pump code for a fast quote.
Frequently asked questions
Which machine does the PSVD2-21 cylinder block fit?
It is part of the Kayaba (KYB) PSVD2-21 main piston pump, typically fitted on mini excavators. Send the pump code stamped on the housing and your machine model; Việt Trung Hải will confirm the correct block and quote you.
Replace the whole block or just lap the face?
Light surface scoring can sometimes be lapped. But tapered piston bores, deep pitting or heat discoloration call for a new block, so the pump regains pressure and flow and the wear does not spread to the pistons and valve plate.
How worn does a PSVD2-21 block have to be before lapping is no longer worth it?
Once the running face carries copper staining or scoring you can catch a fingernail in, or the bores have gone oval, lapping buys a short spell before the pressure drops again — and it thins the block, opening the clearance against the valve plate. At that point fitting a block to code is the cleaner job; Việt Trung Hải keeps the JIC Hydraulics PSVD2-21 on the shelf.
Get a quote
Request a quote: Cylinder block – Kayaba PSVD2-21
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kayaba (KYB) · PSVBushing – Kayaba PSVD2-17PSVD2On requestView · get a quote
Kayaba (KYB) · PSVRotary group – Kayaba PSVD2-17PSVD2On requestView · get a quote
Kayaba (KYB) · PSVRotary group – Kayaba PSVD2-21PSVD2On requestView · get a quote
Kayaba (KYB) · PSVDrive shaft – Kayaba PSVD2-17PSVD2On requestView · get a quote
Kayaba (KYB) · PSVDrive shaft – Kayaba PSVD2-21PSVD2On requestView · get a quote
Kayaba (KYB) · PSVSwash plate – Kayaba PSVD2-17PSVD2On requestView · get a quote
Kayaba (KYB) · PSVShoe plate – Kayaba PSVD2-21PSVD2On requestView · get a quote
Kayaba (KYB) · PSVRetainer plate – Kayaba PSVD2-17PSVD2On requestView · get a quoteTechnical handbook