
Kawasaki · MX
Cylinder block – Kawasaki MX173
Quick answer
The Kawasaki MX173 cylinder block is the rotating-group core of Kawasaki's MX axial-piston unit, where pistons reciprocate to build flow and pressure.
Việt Trung Hải keeps genuine and JIC blocks to the same code that fit the original group as they come, with a fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Cylinder block
- Brand / pump line
- Kawasaki · MX
- Model code
- MX173
- SKU
- 2021-590-1-257
- Condition
- New, correct code
- Availability
- On request
What the Kawasaki MX173 cylinder block fits
The cylinder block is the barrel holding the piston bores that rotate around the drive shaft; pistons reciprocate inside to move oil. The MX173 code belongs to Kawasaki's MX axial-piston family and forms the core of the rotating group, setting the flow and pressure the unit delivers. It seats against the valve plate, so its flatness and sealing govern overall efficiency.
When to replace
Scoring, pitting or uneven wear on the block face lets oil slip past, so the unit runs weak, hot and slow to respond. Cylinder drift under load, jerky motion and flow that fades once the oil warms up point to a worn block that should be replaced together with the pistons and valve plate.
Choosing quality parts
Việt Trung Hải keeps MX173 cylinder blocks on hand in genuine Kawasaki and JIC form. As an authorized JIC Hydraulics distributor we supply the exact code: the valve-plate face and piston bores are cut to fitting tolerance, so the block goes into the original rotating group without reworking the pistons or opening the bores. Call us to match your machine and get a fast quote.
Frequently asked questions
What does the MX173 cylinder block fit?
The MX173 block belongs to Kawasaki's MX axial-piston family and acts as the core of the rotating group. Việt Trung Hải confirms your exact unit and part code so you order the right block.
Should the block be replaced with the pistons and valve plate?
Usually yes. When the block is worn, the pistons and valve plate are often scored too, so replacing one part alone tends to fail again quickly. We can supply the matching set.
Does a JIC MX173 block need machining to go into an existing rotating group?
No. Việt Trung Hải is an authorized JIC Hydraulics distributor; the JIC MX173 block is made to the same code, with the valve-plate face and bores at fitting tolerance, so it works in the original group as it comes. Genuine Kawasaki blocks are also in stock — call for a fast quote.
Get a quote
Request a quote: Cylinder block – Kawasaki MX173
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Kawasaki · MXRotary group kit – Kawasaki MX173MX173On requestView · get a quote
Kawasaki · MXDrive shaft – Kawasaki MX173MX173On requestView · get a quote
Kawasaki · MXShoe plate – Kawasaki MX173MX173On requestView · get a quote
Kawasaki · MXRetainer plate – Kawasaki MX173MX173On requestView · get a quote
Kawasaki · MXValve plate – Kawasaki MX173MX173On requestView · get a quote
Kawasaki · MXPiston – Kawasaki MX173MX173On requestView · get a quote
Kawasaki · MXBall guide – Kawasaki MX173MX173On requestView · get a quote
Kawasaki · MXRotary group kit – Kawasaki MX150MX150On requestView · get a quoteTechnical handbook