
Piston – Komatsu HPV132
Quick answer
The HPV132 piston is the reciprocating element inside the Komatsu HPV main pump's cylinder block, fitted on ~30-ton excavators such as the Komatsu PC300.
Việt Trung Hải supplies genuine and JIC HPV132 pistons — correct code, straight fit in the standard block, fast quote.
Not sure of the code? Send a photo of the pump nameplate or your machine model and our technicians will check it before you order.
- Part type
- Piston
- Brand / pump line
- Komatsu · HPV
- Model code
- HPV132
- Condition
- New, correct code
- Availability
- On request
What the HPV132 piston fits
The piston — the moving element inside an axial piston pump's cylinder block — rides on the swash plate through its slipper shoe, drawing then discharging hydraulic oil on each stroke. This HPV132 piston set serves the Komatsu HPV main pump used on ~30-ton excavators such as the Komatsu PC300. Surface finish and sealing clearance decide the pressure and flow the pump can hold.
When to replace
Worn pistons show scoring, pitting or heat discoloration, loose slippers, and widening clearance that lets oil slip past. The machine loses lifting power and the pump whines and runs hot. Deep scoring usually means replacing the piston set together with the block.
Choosing quality parts
Việt Trung Hải supplies genuine and JIC HPV132 pistons — correct code, correct fit. As an authorized JIC Hydraulics distributor, we take JIC stock through the official channel, cut to spec so the set drops into the block that is already in the pump. Call for a fast quote.
Frequently asked questions
Which excavator does the HPV132 piston fit?
The HPV132 piston belongs to the Komatsu HPV main pump, used on roughly 30-ton excavators such as the Komatsu PC300. Việt Trung Hải verifies the pump code and machine model before shipping to ensure a correct fit.
When should the pump piston be replaced?
Replace when pistons are deeply scored, pitted or heat-discolored, when slippers loosen, or when the pump weakens, lifts slowly and overheats. If the cylinder block is also worn, replace the piston set together with it.
Should I replace the whole piston set with the block?
If piston surfaces or block bores are scored, replacing the piston set together with the cylinder block restores sealing and durability and prevents quick re-wear. Việt Trung Hải advises based on your pump's actual condition.
Get a quote
Request a quote: Piston – Komatsu HPV132
This is a quote model, not a cart. Send your machine model or pump code and we confirm fitment and quote fast.
Related parts
Komatsu · HPVRotary group kit – Komatsu HPV132HPV132On requestView · get a quote
Komatsu · HPVSwash plate – Komatsu HPV132HPV132On requestView · get a quote
Komatsu · HPVRetainer plate – Komatsu HPV132HPV132On requestView · get a quote
Komatsu · HPVValve plate – Komatsu HPV132HPV132On requestView · get a quote
Komatsu · HPVBall guide – Komatsu HPV132HPV132On requestView · get a quote
Komatsu · HPVCylinder block – Komatsu HPV132HPV132On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV140HPV140On requestView · get a quote
Komatsu · HPVRotary group kit – Komatsu HPV160HPV160On requestView · get a quoteTechnical handbook