Machine type
Excavator hydraulic parts
Hydraulic parts for excavator — pumps, motors, rotary groups and seals.
Hệ thống · System
Excavator hydraulic parts
Quick answer
An excavator runs on a hydraulic system made up of a main pump, a control valve, travel and swing motors, and the boom, arm and bucket cylinders. Việt Trung Hải supplies hydraulic pump parts and rotary groups for most common excavator families, both genuine and high-quality replacement, shipped nationwide from our Ho Chi Minh City warehouse.
- 25+ years in construction-machinery parts
- Nationwide delivery · HCMC warehouse
- Matched by machine model
- Fitment confirmed before we quote
An excavator works on a closed hydraulic loop: the main pump draws oil and pushes it through the control valve to drive the travel motors, the swing motor and the boom, arm and bucket cylinders. When one group wears out, you usually replace that part group, not the whole pump.
| Hydraulic system group | Part group we supply |
|---|---|
| Main pump | K3V, K5V (Kawasaki); A8VO, A10V; HPV (Komatsu); PSV (Kayaba) |
| Rotary group | Cylinder block, pistons, valve plate, JIC replacement kits |
| Control / pilot valve | Main valve, relief valve, pilot control block |
| Travel & swing motors | M2X, M5X; MSF, MAG (Kayaba) |
| Cylinders & seals | Ram seal kits, rods, wipers |
| Hydraulic filters | Return, suction and pilot filters |
To order the right way: read your excavator model and the casting code on the pump body (for example K3V112 or K5V140), photograph the plate and send it to Việt Trung Hải. From the pump code we match the rotary group, motor or seal kit, and quote both genuine and high-quality replacement options. Our Ho Chi Minh City warehouse stocks the common families for same-day dispatch upcountry.
Hydraulic system
The hydraulic system on excavator
Series
Common pump & motor series
It varies by maker and model — send your machine model and we'll confirm the exact fit.
Find it
Order the right part for your machine
Pick whichever suits you — our team confirms fitment, then quotes.
By machine model
e.g. Komatsu PC200-8, Hitachi ZX200, Kobelco SK200 — send the model and we match it.
By pump / motor series
e.g. K3V112, A8VO107 — when you know the pump code.
By part number
Send the number stamped on the old part for the exact match.
FAQ
Frequently asked questions
Which hydraulic pump series do excavators use?
The most common are Kawasaki K3V and K5V piston pumps, Rexroth A8VO/A10V, Komatsu HPV and Kayaba PSV. The maker fits different pumps by machine size and generation; Việt Trung Hải carries parts for most of them.
Where do I find the pump code on the excavator?
It is cast or printed on the body of the main pump, sitting under the rear hood behind the engine bay. Wipe off the oil, read a string like K3V112 or K5V140, and send us a photo so we can match the right rotary group and seal kit.
Do you sell rotary groups, motors and seals for excavators?
Yes. We sell rotary groups made up of the cylinder block, pistons, valve plate and JIC replacement kits, plus travel motors, swing motors and cylinder seal kits. The JIC rotary groups we distribute drop straight into the original housing at the correct tolerances, so the pump runs to spec once fitted.
How do I order excavator parts by model?
Send us the excavator model, the pump code on the pump body and which group you need (pump, motor, valve or seals). Việt Trung Hải then matches compatible parts, quotes genuine and replacement options, and ships from our Ho Chi Minh City warehouse nationwide.
Get a quote
Need the right part, fast?
Send your machine model and the part you need — we confirm fitment and quote.
- Pump code / plate
- Machine model
- Photo of the old part